Home > TX-0

Designed at the MIT Lincoln Laboratory largely as an experiment in transistorized design and the construction of very large core memory systems, the TX-0 was essentially a transistorized version of the equally famous Whirlwind, also built at Lincoln Labs. While the Whirlwind filled an entire floor of a large building, TX-0 fit in a single reasonably sized room and yet was somewhat faster. Like the Whirlwind, the TX-0 was equipped with a display system, in this case a 12" oscilloscope hooked to output pins of the processor allowing it to display 511×511 points in a 7" by 7" array.

TX-0 was never really intended to be used as a complete system on its own. The machine included 64K words of memory, requiring 16 bits of address space, but in order to keep costs down the instructions were only 18 bits long. This allowed for only 2 bits of instructions, a total of four. The tixo included only a store, add and branch instruction as a basic set, but the fourth instruction was actually a "macro" that could be programmed.

With the successful completion of the TX-0, work turned immediately to the much larger and far more complex TX-1. However this project soon ran into difficulties due to its complexity, and was redesigned into a smaller form that would eventually be delivered as the TX-2 in 1958. Since core memory was very expensive at the time, several parts of the TX-0 memory were canibalized for the TX-2 project. After a time the TX-0 was no longer considered worth keeping, and was "loaned" (semi-permanently) to the MIT Research Laboratory of Electronics in July 1958, where it became a centerpiece of what would eventually evolve into the MIT Artificial Intelligence Lab.

Delivered from Lincoln Labs with only 4k of core, the machine no longer had to use 16 of its 18 bit instructions to store a location, so the number of instruction bits were doubled to 4, for a total of 16 instructions. This dramatically improved programmability of the machine, but still left room for a later upgrade to 8k. This newly-expanded tixo was used to develop a huge number of advances in computing, including speech and handwriting recognition, as well as the tools needed to work on such projects, including text editorNotepad is the standard text editor for Microsoft Windows A text editor is a piece of computer software for editing plain text. It is distinguished from a word processor in that it does not manage document formatting or other features commonly used in dess and debuggerA debugger is a computer program that is used to debug (and sometimes test) other programs. When the program crashes, the debugger shows the position in the original code if it is a source-level debugger or symbolic debugger commonly seen in integrated des.

Meanwhile the TX-2 project was running into difficulties of its own, and several team members decided to leave the project and start their own company. After a short time selling "lab modules" in the form of single modules from the TX-2 design, the newly-formed Digital Equipment CorporationDigital Equipment Corporation is a pioneering company in the American computer industry. They are generally referred to within the computing industry as DEC . This acronym was once officially used by DEC itself Digital Equipment Corporation#References|[1] (DEC) decided to produce a "cleaned up" TX-0, and delivered it in 1961 as the PDP-1The PDP-1 P rogrammed D ata P rocessor 1 was the first computer in Digital Equipment's PDP series and was first produced in 1960. It is famous for being the computer most important in the creation of hacker culture, at MIT, BBN and elsewhere. The PDP-1 wa. The first PDP-1 would eventually be installed in the room next to TX-0, and would run side-by-side for some time.