Home > Pentium Pro

The Pentium Pro is a sixth-generation x86 architecture microprocessor by Intel originally intended to replace the Pentium Classic in a full range of applications, but later reduced to a more narrow role as a server and high-end desktop chip. It was introduced using an enormous rectangular Socket 8 form factor in November 1995. Intel has since discontinued it in favour of the newer high-end Xeon processor lines.

Despite the name, the Pentium Pro is actually quite different from Intel's earlier Pentium processor, being based on the then-new P6 core (which in a modified form would later be used for the Pentium II, Pentium III and Pentium M). The P6 core features out-of-order execution, speculative execution, and an additional pipe for simple instructions. Speculative execution — the provisional execution of code in a branch that is not yet certain to be taken — considerably increases the penalty for mispredicting a branch, and the Pentium Pro therefore uses a more sophisticated branch prediction algorithm than the Pentium. For the same reason, the Pentium Pro also introduced a conditional move (cmov) instruction which in some cases can be used to avoid the need for a branch instruction altogether. Performance with 32-bit code was excellent; however, the Pentium Pro often ran slower than a vanilla Pentium when running 16-bit code and operating systems.

The Pentium Pro had a 256K-512K on-package cache at introduction, with a 1 MB version introduced later. All versions were expensive, those with more than 256K particularly so. The Pro's "on-package cache" arrangement was unique. The processor and the cache were on separate dies in the same package and connected closely by a full-speed bus. The two dies — both of which were very large by the standards of the day — had to be bonded together early in the production process, before testing was possible. This meant that a single, tiny flaw in either die made it necessary to discard the entire assembly, which was one of the reasons for the Pentium Pro's relatively low production yield and high cost.

Following discussions of future product planning with MicrosoftMicrosoft Corporation , headquartered in Redmond, Washington, USA, is the world's largest software company (with over 50,000 employees in various countries, as of May 2004). Microsoft develops, manufactures, licenses and supports a wide range of software, Intel made the design decision to optimise the Pentium Pro for 32-bit code. In consequence it performed poorly on 16-bit code, and when Windows 95Windows 95 ( codename Chicago is a hybrid 16-bit/ 32-bit graphical operating system released on October 13, 1995 by the Microsoft Corporation. Windows 95 is a direct descendant of Microsoft's formerly separate MS-DOS and Windows products. It is the first turned out to be largely 16-bit, the Pro was not well positioned to compete in the desktop market. Introduced as a high-end server and workstation chip for the 32-bit Windows NTMicrosoft Windows NT is an operating system produced by Microsoft Corporation. It is the ancestor of their current flagship Windows XP. Development When development started in 1988, Windows NT was to be known as OS/2 3. 0, the third version of the operati and UNIX operating systems, it was now destined to stay within that market rather than migrate onto the home desktop. Intel filled the gap with an improvement to the older Pentium Classic design called the Pentium MMXMMX is a SIMD instruction set designed by Intel, introduced in their Pentium MMX microprocessors. It developed out of a similar unit first introduced on the Intel i860. It has been supported on most subsequent IA-32 processors by Intel and other vendors..

Pentium Pro clock speeds were 150, 166, 180 or 200 MHz with a 60 or 66 MHz external busFront Side Bus FSB is the term used to describe the CPU data bus. This bus carries all information that passes from the CPU to other devices within the system such as RAM, PCI expansion cards, hard disks, etc. On older computers where the L2 cache was not clock. Many users chose to overclock their Pentium Pro chips, with the 200 MHz version often being run at 233 MHz, and the 150 MHz version often being run at 166 MHz. The chip was popular in symmetric multiprocessing configurations, with dual and quad SMP server and workstation setups being commonplace. Many of the Pentium Pro systems that were produced are still employed today for those purposes.

The Pentium Pro was succeeded by the Pentium II, which was essentially an improved and re-branded Pentium Pro with the addition of MMX and enhanced 16-bit code performance. A 333 MHz Pentium II processor for Socket 8 was produced by Intel as an upgrade option for owners of Pentium Pro systems.