International Mobile Subscriber Identity IMSI Example

IMSI is an acronym for International Mobile Subscriber Identity. This is a unique number that is associated with all GSM and UMTS network mobile phone users. The number is stored in the SIM. It is sent by the mobile to the network and is used to lookup the other details of the mobile in the HLR or as locally copied in the VLR. In order to avoid the subscriber being identified and tracked by eavesdroppers on the radio interface, the IMSI is sent as rarely as possible and a randomly generated TMSI is sent instead.

An IMSI is up to fifteen digits long, the first three digits are the country code ( MCC), the next digits are the network code ( MNC). The MNC can be either two digits long (normal e.g. in Europe) or three digits long (normal in North America), the remaining digits, up to the maximum length are the unique subscriber number (MSIN) within the network's customer base.

1.1 Example

1.2 Example (American)

2 IMSI Analysis

MSC	284	Bulgaria
MNC	01	MobilTel
MSIN	1234567890

MSC	310	USA
MNC	150	Cingular Wireless
MSIN	123456789

IMSI analysis is the process of examining a subscriber's IMSI in order to identify which network the IMSI belongs to and whether subscribers from that network are allowed to use our network (if they are not local subscribers, this will require a roaming agreement ).

If the subscriber is not from our network, then we must convert the IMSI to a Global Title at this state which can then be used for accessing the subscribers data in the remote HLR. This is mainly important for international mobile roamingRoaming is a general term in wireless telecommunications that refers to the extending of connectivity service in a network that is different than the network with which a station is registered. The canonical example of "roaming" is for cellular phones, wh.

Outside North America the IMSI is converted, to the hybrid number format, E.214214 is a numbering plan used for delivering mobility management related messages in GSM networks. 214 number is derived from the IMSI E. 214 numbers are composed of two parts. The first, the E. 164 part, is made up of a country code followed by the networ, which is similar to, but not the same as an E.164164 is an ITU-T recommendation which defines the international public telecommunication numbering plan used in the PSTN and some other data networks. The title of the original and revision 1 was "Numbering Plan for the ISDN era". 164 adresses can be used number. The E.214 numbering planA numbering plan is a type of numbering scheme used in telecommunications. This is a set of rules used for making numbers. For example, most telephone numbers belong to the E. 164 numbering plan, though that won't include internal extensions in some PABXs is very similar to, but distinct from, the E.164164 is an ITU-T recommendation which defines the international public telecommunication numbering plan used in the PSTN and some other data networks. The title of the original and revision 1 was "Numbering Plan for the ISDN era". 164 adresses can be used number format (more or less a telephone number) and is used for international routing of SS7 messages. E.214 provides a method for converting the IMSI into a number that can be used for routing to international SS7 switches. The conversion process described in E.214 can be interpreted as implying that there are two separate stages of conversion; first determine the MCC and convert to E.164 CCThis is a list of country calling codes also known as international direct dialing (IDD) codes, which are needed to access international telephone services. The numbers are assigned by the International Telecommunication Union in standard E. The numbers a then second determine MNC (two or three digits) and convert to national network code for the carrier's network. This process is not used in practise and the GSM numbering authority has clearly stated that a one stage process is used [1].

In North America, the IMSI is just directly converted to an E.212 number with no modification of its value. This can be routed directly on American SS7 networks.

After this conversion, SCCP is used to send the message to its final destination. For more details please see Global Title Translation.

2.1 Example of IMSI analysis and conversion outside World Area 1

N.B. this example shows the actual practise which is not clearly as described in the standards

Translation rule:

* match numbers starting 24801 (Bulgaria MCC + MobilTel MNC) * identify this as belonging to MobilTel-Bulgaria network * remove first five digits (length of MCC+MNC) * add 359888 (Bulgaria E.164 country code + a Bulgarian local prefix reaching MobilTel's network) * mark the number as having E.214 numbering plan. * route message on Global Title across SCCP network

so we get 284011234567890 becomes 3598881234567890 numbering plan E.214

Translation rule:

* match numbers starting 310150 (America first MCC + Cingular MNC) * remove first six digits (length of MCC+MNC) * add 14054 (North America E.164 country code + Network Code for Cingular) * mark the number as having E.214 numbering plan. * route message on Global Title across SCCP network

so we get 310150123456789 becomes 14054123456789 numbering plan E.214

The result is an E.214 compliant Global Title, ( Numbering Plan Indicator is set to 7 in the SCCP message). This number can now be sent to Global Title Analysis.

2.2 Example of IMSI analysis and conversion inside World Area 1 (North America)

Translation rule:

* match numbers starting 24801 (Bulgaria MCC + MobilTel MNC) * identify this as belonging to MobilTel-Bulgaria network * do not alter the digits of the number * mark the number as having E.214 numbering plan. * route message on Global Title across SCCP network

so we get 284011234567890 becomes 284011234567890 numbering plan E.212

This number has to be converted on the ANSI to ITU boundary. For more details please see Global Title Translation.

3 HNI

The Home Network Identity (HNI) is the combination of the MCC and the MNC. This is the number which fully identifies a subscriber's home network. The reason to make this specific distinction is that in a country with multiple country codes (e.g. the USA has codes 310 up to 316) there may be two different networks, with the same Mobile Network Code, but only one of which is the home network. In order to know which network a mobile belongs to we have to analyse the entire HNI at once.

3.1 Global Title problems

E.214's recommendation for Global Title Translation does not take into account countries with more than 1 MCC (for example the U.S., which has 7 MCCs), or shared numbering plans (for example NANPA, or the +1 country code, which applies to the U.S., Canada, and all the countries in the Caribbean).

The problem lies in de-translation of the global title back into a mobile network E.212 IMSI. Since E.214 recommends that the country part of the translation be done first, it presumes that a given E.164 country code only relates to a single E.212 mobile country code. Unfortunately this is untrue in NANPA member nations, and doubly untrue in the U.S. So a global title with CC of 1 can indicate any of 7 U.S. MCCs, or Canada, or any Caribbean nation.

This has led to a temporary discontinuation of distributing IMSIs in the U.S. with MCCs other than 310, in an attempt to minimise the ambiguity.

In practise, however, home carriers use a deeper translation process which performs a lookup based on the entire CC+NC in order to better determine the correct country (in the case of NANPA, this would be 1+area code, which can uniquely identify a country -- but there are hundreds of area codes). More of the number then has to be used to determine the carrier network (in some cases up to 4 digits).

Future possibilities for eliminating the global title problem include upgrading international switches to accept IMSIs as global titles, thus eliminating any such ambiguities. This is an especially handy solution, as non-GSM networks begin to transition to IMSIs for subscriber identification. However the expense of such an infrastructure upgrade may not be feasible for all countries anytime soon.

4 External links

GSM Standard

<Hide>

Home > International Mobile Subscriber Identity

1 IMSI

1.1 Example

1.2 Example (American)

2 IMSI Analysis

2.1 Example of IMSI analysis and conversion outside World Area 1

2.2 Example of IMSI analysis and conversion inside World Area 1 (North America)

3 HNI

3.1 Global Title problems

4 External links

Topics: International Mobile Subscriber Identity, IMSI, Example...