Home > Frequency frogging

1. The interchanging of the frequencies of carrier channels to accomplish specific purposes, such as to prevent feedback and oscillation, to reduce crosstalk, and to correct for a high frequency-response slope in the transmission line.

Note: Frequency frogging is accomplished by having modulators, which are integrated into specially designed repeaters, translate a low-frequency group to a high-frequency group, and vice versa. A channel will appear in the low group for one repeater section and will then be translated to the high group for the next section because of frequency frogging. This results in nearly constant attenuation with frequency over two successive repeater sections, and eliminates the need for large slope equalization and adjustments. Singing and crosstalk are minimized because the high-level output of a repeater is at a different frequency than the low-level input to other repeaters.

2. In microwaveThis page is about the radiation; for the appliance, see microwave oven. Microwaves are electromagnetic waves with a wavelength longer than infrared light, but shorter than radio waves. Microwaves, also known as Super High Frequency (SHF signals, have wav systems, the alternate use of two frequencies at repeater sites to prevent feedback and oscillation.

Source: From Federal Standard 1037CFederal Standard 1037C entitled Telecommunications: Glossary of Telecommunication Terms is a U. Federal Standard, issued by the General Services Administration pursuant to the Federal Property and Administrative Services Act of 1949, as amended. This docu and from MIL-STD-188MIL-STD-188 is a series of U. military standards relating to telecommunications. Documents 100 Common Long Haul and Tactical Communication System Technical Standards. 105 Interoperability and Performance Standards for the All Digital Tactical-To-Strategic