Binary Numeral System Overview History Representation

Since binary numerals use a radix of two, written binary numbers require two symbols, typically 0 and 1. By way of comparison, the decimal numeral system uses a radix of ten, and requires ten symbols, 0 through 9. In the binary system, all numbers larger than one require more digits to write than they would in the decimal system. The number two is written "10" in binary; the number six requires three digits in binary, "110"; and the number nine-hundred ninety-nine (decimal "999") requires ten digits in binary, "1111100111". This extra length makes binary somewhat cumbersome for humans, so those who frequently work with binary numerals may use higher radix systems like octal, where each octal digit represents 3 binary digits, or hexadecimal, which compresses binary numbers by a factor of 4.

2 History

The first known description of a binary numeral system was made by Pingala in his Chhandah-shastra , placed variously in the 5th century BC or the 2nd century BC. Pingala described the binary numeral system in connection with the listing of Vedic meters with short or long syllables. According to one Indian tradition, Pingala was the younger brother of the great grammarian Panini. The modern binary number system was first documented by Gottfried LeibnizGottfried Wilhelm von Leibniz ( July 1, 1646 in Leipzig November 14, 1716 in Hannover) was a German philosopher, scientist, mathematician, diplomat, librarian, and lawyer of Sorb descent. Leibniz is credited with the term " function" ( 1694), which he use in the 17th century16th century 17th century 18th century more centuries) As a means of recording the passage of time, the 17th century was that century which lasted from 1601- 1700. During this period, the power of England and the United Provinces increased; while that of. Pingala's system begins with the value one, while Leibniz' begins with zero, like the modern binary numeral system.

In 1854Events January 13 The accordion is patented by Anthony Faas. February 11 Major streets lit by coal gas for first time. February 14 Texas is linked by telegraph with the rest of the United States, when a connection between New Orleans and Marshall, Texas i, BritishThe United Kingdom of Great Britain and Northern Ireland is a state in Western Europe, usually known simply as the United Kingdom the UK Britain or less accurately as Great Britain . The UK was formed by a series of Acts of Union which united the formerly mathematician George BooleThis article is not about George Boolos, another mathematical logician. George Boole [bul], ( November 2, 1815 December 8, 1864) was a mathematician and philosopher. As the inventor of Boolean algebra, the basis of all modern computer arithmetic, Boole is published a landmark paper detailing a system of logicIn ordinary language, logic is the reasoning used to reach a conclusion from a set of assumptions. More formally, logic is the study of inference—the process whereby new assertions are produced from already established ones. As such, of particular concern that would become known as Boolean algebraIn mathematics and computer science, Boolean algebras or Boolean lattices are algebraic structures which "capture the essence" of the logical operations AND, OR and NOT as well as the corresponding set theoretic operations intersection, union and compleme. His logical system proved instrumental in the development of the binary system, particularly in its implementation in electronic circuitry.

The first computer to use the binary numeral system was Konrad ZuseKonrad Zuse ( June 22, 1910 December 18, 1995) was a German engineer and computer pioneer. His greatest achievement was the completion of the first functional tape-stored-program-controlled computer, the Z3, in 1941. It is sometimes claimed that this is t's Z3 computer in 1941.

3 Representation

A binary number can be represented by any sequence of bits (binary digits), which in turn may be represented by any mechanism capable of being in two mutually exclusive states. The following sequences of symbols could all be interpreted as binary numbers representing different values:

11010011 on off off on off on - | - | | - | - - | - | o x o o x o o x N Y N N Y N Y Y Y true false false true true false

The numeric value represented in each case is dependent upon the value assigned to each symbol. In a computer, the numeric values may be represented by two different voltages; on a magnetic disk, magnetic polarities may be used. A "positive", "yes", or "on" state is not necessarily equivalent to the numerical value of one; it depends on the architecture in use.

In keeping with customary representation of numerals using arabic numerals, binary numbers are commonly written using the symbols 0 and 1. When written, binary numerals are often subscripted or suffixed in order to indicate their base, or radix. The following notations are equivalent:

100101 binary (explicit statement of format)

100101b (a suffix indicating binary format)

bin 100101 (a prefix indicating binary format)

100101₂ (a subscript indicating base-2 notation)

When spoken, binary numerals are usually pronounced by pronouncing each individual digit, in order to distinguish them from decimal numbers. For example, the binary numeral "100" is pronounced "one zero zero", rather than "one hundred", in order to make explicit the fact that a binary numeral is being discussed, as well as for purposes of correctness. Since the binary numeral "100" is equal to the decimal value four, it would be confusing, and numerically incorrect, to refer to the numeral as "one hundred."

4 Counting in binary

Counting in binary is similar to counting in any other number system. Beginning with a single digit, counting proceeds through each symbol, in increasing order. Decimal counting uses the symbols 0 through 9, while binary only uses the symbols 0 and 1.

When the symbols for the first digit are exhausted, the next-higher digit (to the left) is incremented, and counting starts over at 0. In decimal, counting proceeds like so:

00, 01, 02, ... 07, 08, 09 (rightmost digit starts over, and the 0 is incremented)

10, 11, 12, ... 17, 18, 19 (rightmost digit starts over, and the 1 is incremented)

20, 21, 22, ...

When the rightmost digit reaches 9, counting returns to 0, and the second digit is incremented. In binary, counting is similar, with the exception that only the two symbols 0 and 1 are used. When 1 is reached, counting begins at 0 again, with the digit to the left being incremented:

000, 001 (rightmost digit starts over, and the second 0 is incremented)

010, 011 (middle and rightmost digits start over, and the first 0 is incremented)

100, 101 (rightmost digit starts over again, middle 0 is incremented)

110, 111...

It has been said that "there are only 10 types of people in the world: those who understand binary, and those who don't."

5 Binary arithmetic

Arithmetic in binary is much like arithmetic in other numeral systems. Addition, subtraction, multiplication, and division can be performed on binary numerals.

5.1 Addition

The simplest arithmetic operation in binary is addition. Adding two single-digit binary numbers is relatively simple:

0 + 0 = 0

0 + 1 = 1

1 + 0 = 1

1 + 1 = 10 (the 1 is carried)

Adding two "1" values produces the value "10", equivalent to the decimal value 2. This is similar to what happens in decimal when certain single-digit numbers are added together; if the result exceeds the value of the radix (10), the digit to the left is incremented:

5 + 5 = 10

7 + 9 = 16

This is known as carrying in most numeral systems. When the result of an addition exceeds the value of the radix, the procedure is to "carry the one" to the left and add the next place value. Carrying works the same way in binary:

1 1 1 1 (carry) 0 1 1 0 1 + 1 0 1 1 1 ------------- = 1 0 0 1 0 0

Starting in the rightmost column, 1 + 1 = 10. The 1 is carried to the left, and the 0 is written at the bottom of the rightmost column. The second column from the right is added: 1 + 0 + 1 = 10 again; the 1 is carried, and 0 is written at the bottom. The third column: 1 + 1 + 1 = 11. This time, a 1 is carried, and a 1 is written in the bottom row. Proceeding like this gives the final answer 100100.

5.2 Subtraction

Subtraction works in much the same way:

0 - 0 = 0

0 - 1 = 1 (with borrow)

1 - 0 = 1

1 - 1 = 0

One binary numeral can be subtracted from another as follows:

* * * * (starred columns are borrowed from) 1 1 0 1 1 1 0 - 1 0 1 1 1 ------------- = 1 0 1 0 1 1 1

Subtracting a positive number is equivalent to adding a negative number of equal absolute value; computers typically use the two's complement notation to represent negative values. This notation eliminates the need for a separate "subtract" operation. For further details, see two's complement.

5.3 Multiplication

Multiplication in binary is similar to its decimal counterpart. Two numbers A and B can be multiplied by partial products: for each digit in B calculate the product of that digit and A and write this partial product on a new line, shifted leftward so that its rightmost digit lines up with the digit in B that was used. Finally, calculate the sum of all the partial products.

Since there are only two digits in binary, there are only two possible outcomes of each partial multiplication:

If the digit in B is 0, the partial product is also 0
If the digit in B is 1, the partial product is equal to A

For example, the binary numbers 1011 and 1010 are multiplied as follows:

1 0 1 1 (A) × 1 0 1 0 (B) --------- 0 0 0 0 ← Corresponds to a zero in B 1 0 1 1 ← Corresponds to a one in B 0 0 0 0 + 1 0 1 1 --------------- = 1 1 0 1 1 1 0

5.4 Division

Binary division is again similar to its decimal counterpart:

__________ 1 0 1 | 1 1 0 1 1

Here, the divisor is 101, or 5 decimal, while the dividend is 11011, or 27 decimal. The procedure is the same as that of decimal long division; here, the divisor 101 goes into the first three digits 110 of the dividend one time, so a "1" is written on the top line. This result is multiplied by the divisor, and subtracted from the first three digits of the dividend; the next digit (a "1") is included to obtain a new three-digit sequence:

1 __________ 1 0 1 | 1 1 0 1 1 - 1 0 1 ----- 0 1 1

The procedure is then repeated with the new sequence, continuing until the digits in the dividend have been exhausted:

1 0 1 __________ 1 0 1 | 1 1 0 1 1 - 1 0 1 ----- 0 1 1 - 0 0 0 ----- 1 1 1 - 1 0 1 ----- 1 0

Thus, the quotient of 11011 divided by 101 is 101₂, as shown on the top line, while the remainder, shown on the bottom line, is 10₂. In decimal, 27 divided by 5 is 5, with a remainder of 2.

6 Bitwise logical operations

Though not directly related to the numerical interpretation of binary symbols, sequences of bits may be manipulated using Boolean logical operators. When a string of binary symbols are manipulated in this way, it is called a bitwise operation; the logical operators AND, OR, and XOR may be performed on corresponding bits in two binary numerals provided as input. The logical NOT operation may be performed on individual bits in a single binary numeral provided as input. Sometimes, such operations may be used as arithmetic short-cuts, and may have other computational benefits as well. See Bitwise operation.

7 Conversion to and from other numeral systems

7.1 Decimal

This method works for conversion from any base, but there are better methods for bases which are powers of two, such as octal and hexidecimal given below.

In place-value numeral systems, digits in successively lower, or less significant, positions represent successively smaller powers of the radix. The starting exponent is one less than the number of digits in the number. A five-digit number would start with an exponent of four. In the decimal system, the radix is 10 (ten), so the left-most digit of a five-digit number represents the 10⁴ (ten thousands) position. Consider:

97352₁₀ is equal to:

9 times 10⁴ (9 × 10000 = 90000) plus

7 times 10³ (7 × 1000 = 7000) plus

3 times 10² (3 × 100 = 300) plus

5 times 10¹ (5 × 10 = 50) plus

2 times 10⁰ (2 × 1 = 2)

Multiplication by the radix is simple. The digits are shifted left, and a 0 is appended to the right end of the number. For example, 9735 times 10 is equal to 97350. So one way to interpret a string of digits is as the last digit added to the radix times all but the last digit. 97352 equals 9735 times 10 plus 2. An example in binary is 1101100111₂ equals 110110011₂ times 2 plus 1. This is the essence of the conversion method. At each step, write the number to be converted as 2*k + 0 or 2*k + 1 for an integer k, which becomes the new number to be converted.

118₁₀ equals

59 x 2 + 0

(29 x 2 + 1) x 2 + 0

((14 x 2 + 1) x 2 + 1) x 2 + 0

(((7 x 2 + 0) x 2 + 1) x 2 + 1) x 2 + 0

((((3 x 2 + 1) x 2 + 0) x 2 + 1) x 2 + 1) x 2 + 0

(((((1 x 2 + 1) x 2 + 1) x 2 + 0) x 2 + 1) x 2 + 1) x 2 + 0

1 x 2⁶ + 1 x 2⁵ + 1 x 2⁴ + 0 x 2³ + 1 x 2² + 1 x 2¹ + 0 x 2⁰

1110110₂

So in the algorithm to convert from an integer decimal numeral to its binary equivalent, the number is divided by two, and the remainder written in the ones-place. The result is again divided by two, its remainder written in the next place to the left. This process repeats until the number becomes zero.

For example, 118₁₀, in binary, is:

Operation	Remainder
118/2 = 59	0
59/2 = 29	1
29/2 = 14	1
14/2 = 7	0
7/2 = 3	1
3/2 = 1	1
1/2 = 0	1

Reading the sequence of remainders from the bottom up gives the binary numeral 1110110₂.

To convert from binary to decimal is the reverse algortihm. Starting from the left, double the result and add the next digit until there are no more. For example to convert 110010101101₂ to decimal:

Result	Remaining digits
0	110010101101
0*2 + 1 = 1	10010101101
1*2 + 1 = 3	0010101101
3*2 + 0 = 6	010101101
6*2 + 0 = 12	10101101
12*2 + 1 = 25	0101101
25*2 + 0 = 50	101101
502 + 1 = 101*	01101
1012 + 0 = 202*	1101
2022 + 1 = 405*	101
4052 + 1 = 811*	01
8112 + 0 = 1622*	1
16222 + 1 = 3245*

and the result is 3245₁₀.

The fractional parts of a numbers are converted with similar methods. They are again based on the equivalence of shifting with doubling or halving.

In a fractional binary number such as .11010110101₂, the first digit is 1/2, the second 1/2², etc. So if there is a 1 in the first place after the decimal, then the number is at least 1/2, and vice versa. Double that number is at least 1. This suggests the algorithm: Repeatedly double the number to be converted, record if the result is at least 1, and then throw away the integer part.

For example, (1/3)₁₀, in binary, is:

Converting	Result
1/3	0.
1/3 * 2 = 2/3 < 1	0.0
2/3 * 2 = 1 1/3 ≥ 1	0.01
1/3 * 2 = 2/3 < 1	0.010
2/3 * 2 = 1 1/3 ≥ 1	0.0101

which is the repeating fraction 0.0101...₂

Or for example, 0.1₁₀, in binary, is:

Converting	Result
0.1	0.
0.1 * 2 = 0.2 < 1	0.0
0.2 * 2 = 0.4 < 1	0.00
0.4* 2 = 0.8 < 1	0.000
0.8* 2 = 1.6 ≥ 1	0.0001
0.6 * 2 = 1.2 ≥ 1	0.00011
0.2 * 2 = 0.4 < 1	0.000110
0.4 * 2 = 0.8 < 1	0.0001100
0.8 * 2 = 1.6 ≥ 1	0.00011001
0.6 * 2 = 1.2 ≥ 1	0.000110011
0.2 * 2 = 0.4 < 1	0.0001100110

which is also a repeating fraction 0.000110011...₂ It may come as a surprise that terminating decimal fractions can have repeating expansions in binary. It is for this reason that many are surprised to discover that 0.1 + ... + 0.1 differs from 1 in floating point arithmetic. In fact, the only binary fractions with terminating expansions are of the form of an integer divided by a power of 2, which 1/10 is not.

The final conversion is from binary to decimal fractions. The only difficulty arises with repeating fractions, but otherwise the method is to shift the fraction to an integer, convert it as above, and then divide by the appropriate power of two in the decimal base. For example,

x	=	1100	.101110011100...
x times 2⁶	=	1100101110	.0111001110...
x times 2	=	11001	.0111001110...
x times (2⁶ - 2)	=	1100010101
x	=	(781/62)₁₀

7.2 Hexadecimal

Binary may be converted to and from hexadecimal somewhat more easily. This is due to the fact that the radix of the hexadecimal system (16) is a power of the radix of the binary system (2). More specifically, 16 = 2⁴, so it takes exactly four digits of binary to represent one digit of hexadecimal.

The following table shows each hexadecimal digit along with the equivalent four-digit binary sequence:

Hex	Binary	Hex	Binary	Hex	Binary	Hex	Binary
0	0000	4	0100	8	1000	C	1100
1	0001	5	0101	9	1001	D	1101
2	0010	6	0110	A	1010	E	1110
3	0011	7	0111	B	1011	F	1111

To convert a hexadecimal number into its binary equivalent, simply substitute the corresponding binary digits:

3A₁₆ = 0011 1010₂

E7₁₆ = 1110 0111₂

To convert a binary number into its hexadecimal equivalent, divide it into groups of four bits. If the number of bits isn't a multiple of four, simply insert extra 0 bits at the left (called padding). For example:

1010010₂ = 0101 0010 grouped with padding = 52₁₆

11011101₂ = 1101 1101 grouped = DD₁₆

7.3 Octal

Binary is also easily converted to the octal numeral system, since octal uses a radix of 8, which is a power of two (namely, 2³, so it takes exactly three binary digits to represent an octal digit). The correspondence between octal and binary numerals is the same as for the first eight digits of hexadecimal in the table above. Binary 000 is equivalent to the octal digit 0, binary 111 is equivalent to octal 7, and so on.

Converting from octal to decimal proceeds in the same fashion as it does for hexadecimal:

65₈ = 110 101₂

17₈ = 001 111₂

And from binary to octal:

101100₂ = 101 100₂ grouped = 54₈

10011₂ = 010 011₂ grouped with padding = 23₈

8 Representing real numbers

Non-integers can be represented by using negative powers, which are set off from the other digits by means of a radix point (called a decimal point in the decimal system). For example, the binary number 11.01₂ thus means:

1 times 2¹ (1 × 2 = 2) plus

1 times 2⁰ (1 × 1 = 1) plus

0 times 2^-1 (0 × (1/2) = 0) plus

1 times 2^-2 (1 × (1/4) = 0.25)

For a total of 3.25 decimal.

All dyadic rational numbers p/2^a have a terminating binary numeral -- the binary representation has only finitely many terms after the radix point. Other rational numbers have binary representation, but instead of terminating, they recur, with a finite sequence of digits repeating indefinitely. For instance

1/3₁₀ = 1/11₂ = 0.0101010101...₂

12₁₀/17₁₀ = 1100₂ / 10001₂ = 0.10110100 10110100 10110100...₂

The phenomenon that the binary representation of any rational is either terminating or recurring also occurs in other radix-based numeral systems. See, for instance, the explanation in Decimal. Another similarity is the existence of alternative representations for any terminating representation, relying on the fact that 0.111111... is the sum of the geometric series 2^-1 + 2^-2 + 2^-3 + ... which is 1.

Binary numerals which neither terminate nor recur represent irrational numbers. For instance,

0.10100100010000100000100.... does have a pattern, but it is not a fixed-length recurring pattern, so the number is irrational
1.0110101000001001111001100110011111110... is the binary representation of √2, the square root of 2, another irrational. It has no discernible pattern, although a proof that √2 is irrational requires more than this. See irrational number.

9 See also

10 External links

Computer arithmetic Computer terminology Numeration

<Hide>

Home > Binary numeral system

1 Overview